Balcony Art is an idea for a new kind of furniture group for those who have limited space on their balcony. This report will discuss conceptual and part of primary construction of the chair and table for use on balconies, how the products developed from an idea to primary, preliminary products.In the conceptual design part, the report will discuss how product requirements and specifications are developed and how these controls the design.In the primary construction, the report will discuss the products journey from sketch to functional CAD models and how the products of individual parts are designed and how the durability calculations affect the design..

In article 1.2 c) EC regulation 852/2004 it says that the regulation is not applicable to producers who directly supply small quantities of Primary products to the final consumer or to the local retailers who in their turn directly supply the final consumer. An almost identical regulation can be found in article 1.3 c) EC regulation 853/2004. The supply by a primary producer of small quantities of Primary products, of animal origin or not, are consequently excepted from these two hygiene regulations. In article 1.3 EC regulation 852/2004 and article 1.4 EC regulation 853/2004 it says that the member states are to establish national rules in their national legislation as to the regulation of exception for small quantities. The aim of this study was to investigate the handling of small quantities of Primary products distributed locally in Sweden but also the handling of these products in other countries.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO.

The essay aimed to investigate whether people choose light products or original products regarding dairy products and beverages as well as the motives for their respective choice. Finally the purpose was to find out where they had obtained the knowledge to make their choice and how they thought media had affected their choice. The method used was a qualitative decsriptive study with three focus groups consisting of six women aged 40-50, six women aged 20-30 and four men aged 25-35. Each interview lasted 2 hours. The groups were a selection of comfort.   The results showed that all respondents choose original products. The primary reason was because they thought that original products tasted better and had a better consistence.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO. In the developing of fixtures have ideas been discussed with the staff, and instructions were made about how you are suppose to hang up the different products.

The background of this research is that Swedish food products have hard to compete at the home market, depending on imported food products that increase more and more for every year that pass by. The ethic values LRF associate with Swedish food products, many customers have hard to put in relation with condition of foreign agriculture. Most customers today inquire high quality, safety and convenience in the food which they are eating. The source of their food seems to have less meaning. Many restaurants and bigger households appreciate Swedish food products and wants to buy them but price differences against foreign wares are to high. We have done oral interviews with wholesale dealers, restaurants, public purchasers and with different market organisations, there we have discussed buying strategies, the way they see the primary producer, the conscious of guests, choice and attitudes to Swedish and foreign products, distribution of power in the food market chain and to what position and suspension, they want the ranks of suppliers to have. The result shows the share of imported wares within restaurants and bigger households are at a high level and will continuing increasing. Within these sectors the final consumer in many cases put less effort in the origin of the raw source of food.

At present Getinge can offer a new generation of trolleys that they produced in 2011. The trolley used to Getinge various autoclaves and has the primary task to help the user/sterilization personnel to transport shelves or baskets, with or without cargo, from a packing table to the autoclave. The purpose of this thesis has been to develop a primary solution how the docking process between Getinge trolleys and autoclaves can be improved. The work has in most part followed Fredy Olsson principle and primary construction method. The work has included product research, study visit and development of a requirements specification, to satisfy Getinge, their clients and circumvention products requirements.

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

Within the interconnected global markets of today; people, products, and information travel at a pace never met before. In light of the global retail markets recent integration, consumers are opened up to new products and are beginning to develop a vetted interest in the heritage of those products. Within literature this process has been coined "Country of Origin" COO, and its impacts on consumer attitudes, product value- assessment, and overall behaviors has been one of the most emphasized areas of "international business" studies, during the last three decades. Numerous studies have shown a correlation between positive or advantageous associations to a country of origin, and the actual products representing and coming out of that country. It is by this synergetic process that so-called positive COO-effects are brought forth.The goal of this thesis stems directly from the still unexplored potential for Swedish firms to differentiate their products and brands on new international markets, through a strategic and coherent communication of relevant Swedish COO-effects.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

Where is technology heading? And how will our behaviors towards these new innovations look? This project questions the direction of ?beyond smart? products, through scenarios within our everyday life. The work is both critical and speculative. Speculative in the sense that it is speculating in how a future scenario with ?beyond smart? products would look like.

The aim of this thesis is to practice the theoretical methods that are concerned during the product development process of two new products. The theoretical concepts that embody the two products are created out of a product specification which is given by a commissioner with a private interest. The primary tasks of the design of the concepts are aimed on the products shape, which is to be created as a flexible structure by using silicon rubber as material.The storage box is a further development of the already known food storage box, or lunch box, which is common used in consumer kitchens. The main idea is to design a flexible product by using silicone rubber. It will able the storage box to be compressed when it is not used, be storage friendly and not consume more space than necessary in a storage compartment.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.